Microcement Leveling · Construction Process

The excellent fluidity of Vanlei's Microcement Leveling is attributed to the continuous reflection and experimentation by Vanlei's research and development team on microcement. This results in the reduction of construction steps and a decrease in the requirements for the number of construction personnel and techniques.

Vanlei · Microcement Leveling

Microcement Leveling by Vanlei is a decorative coating composed of Portland cement, additives, and mineral pigments. It is a surface material with a thickness of only 1mm.This is a brand-new integrated wall-to-floor solution independently developed by the Vanlei Microcement Research Institute team.

Breaking Technological Barriers · One-Time Forming

Based on the original characteristics of microcement products, there has been a revolutionary technological breakthrough. This significantly reduces the requirements for construction techniques and the difficulty of construction. It only requires the use of a flat plastic scraper for easy application. The cumbersome manual construction sequence and process will be abandoned, effectively solving issues such as slow drying time of microcement materials and high labor costs.

In terms of material performance, the use of ordinary self-leveling cement is limited in application, with a single color and susceptibility to cracking. Microcement Leveling not only ingeniously addresses these challenges but also resolves dependencies on manual operations, reducing human intervention and lowering construction costs.

Hexagonal Warrior · Microcement Leveling

Microcement Leveling excels in seven aspects, including construction convenience, strength, abrasion resistance, weather resistance, and applicability.

Construction Tools · Construction Process

Microcement Leveling demonstrates construction convenience in both tools and techniques.

Microcement Leveling Construction

Step One: Roller Coating Primer

Complete the base surface treatment and roll apply the primer (can add about 25% water).

Cover evenly with two coats.

Microcement Leveling Construction

Step Two: Mix the materials.

Microcement Leveling components A and B in a ratio of 12.5:6, and add pigment, stirring thoroughly. Let the well-mixed slurry stand for 3-5 minutes, then stir it again for 1 minute.

Microcement Leveling Construction

Step Three: Apply the Main Material

Pour the slurry onto the floor and spread it evenly with a special plastic scraper.

Microcement Leveling Construction

Step Four: Applying the Main Material for the Second Coat

Apply the second layer of slurry with a special plastic scraper, spreading it evenly.

Microcement Leveling Construction

Step Five: Polishing and Cleaning

After drying, polish with 320-grit sandpaper and clean the surface.

Microcement Leveling Construction

Step Six: Roller Coating Primer

Roll-coat the penetrating primer (note: this is the primer).

Cover evenly with one coat.

Microcement Leveling Construction

Step Seven: Roller Coating The Topcoat

Roller coating the topcoat (can add about 10% water).

Cover evenly with two coats.